_MG_6733[1]_edited_edited_edited_edited.

THE :HELM

All-in-One fishing system for trolling while sailing

Heavy-duty reel power
Integrated holder mount
Pre-matched line & swivel

Space-Saving and Safe

The bracket mounts easily on your yacht. It stays secure even in rough seas, giving you peace of mind knowing your gear is always safely in place.

Designed with sailors in mind, it combines simplicity and safety, making it a natural fit on any offshore yacht.

Ergonomic Furling System

The integrated furling system works just like a headsail furler, so you can reel in your catch smoothly and with control, even while under sail.

Built powerful and robust, it blends sailing with traditional fishing at sea.”

Automatic Drag System

The automatic drag system adapts smoothly to the pull of the fish. It proves especially useful on center-cockpit yachts.

Designed for hands-off reliability, it lets you focus on sailing while the system works in the background.

Heavy Duty Performance

Crafted to handle offshore fishing, the :HELM is built strong where it matters most. It comes equipped with a finely adjustable drag system, giving you precise control over line pressure.

Designed for life aboard, it balances strength with simplicity so you can focus on the catch.

Fishing with the :HELM

Sailing LadyFive’s journey across the Atlantic, they turned their offshore passages into unforgettable fishing experience.

Feel free to reach out to Sailing LadyFive if you want some first hand review.

Specifications

:HELM

Drag

Maximum resistance 60kg

Autodrag feature resistance up to 15kg

Design and mounting

Designed for marine conditions.

Product weight 2500g, excluding fishing line.
Mounting U-bolts fit pipes with diameters between 22-30mm.

Line Capacity

Monofilament Nylon Line:
1,60mm (86kg) - 260m

1,20mm (60kg) - 420m

Braided Line (only on request):

0,70mm (81kg) - 1120m

Equip Your Yacht for Offshore Fishing

The :Helm is more than a reel, it's a complete setup designed for bluewater sailing.

Everything you need, in one system without the mess of a handline or the need to buy extra rod holders.

Frequently asked questions

01
The :HELM drag package is engineered to be stronger than the supplied fishing line. In case of an emergency, fully tightening the Drag Knob will allow the user to break the line safely and efficiently.
Warning: Be aware that when the fishing line breaks, it can backlash. Always exercise caution and ensure a safe distance to avoid injury.

Releasing the lure

Begin by releasing the line through a controlled counterclockwise turn of the Drag Knob (1). Manually pull out the first meter of line, allowing the fishing lure to enter the water. The natural drag from the water will facilitate the automatic release of additional line as the boat moves forward.

Once the fishing lure has reached the desired distance behind the vessel, gradually tighten the Drag Knob (1) by turning it clockwise. This will secure the line and stop further release, ensuring that the line is held firmly in place and ready for fishing operations.

Retrieving the Lure

Before reeling in the lure or catch, ensure that the AutoDrag slider is in the disengaged position.
Close the Drag Knob (1) by turning it clockwise to gradually increase the drag force, providing controlled resistance during retrieval.
Identify the correct end of the endless line system to initiate the furling mechanism. Begin pulling the selected end and ensure that the entire reel rotates smoothly to pull in the lure or catch.
02
The :HELM fishing reel is designed to be mounted on the pushpit at the transom of the vessel. Suitable pipe diameters range from 22 to 30 mm for secure attachment. Additionally, the reel can be mounted on a flat surface using a standard M8 bolt (not included with the product). Ensure that the chosen mounting location provides easy access for operation and maintenance, and verify that the surface or pushpit is sturdy enough to handle the forces during fishing activities.
To ensure a better experience, it is recommended to align the :HELM with the center axis of the vessel. There are two variants available for purchase:

Straight variant – no angle offset
Angled variant – 10-degree offset
03
The :HELM fishing reel is equipped with advanced features to enhance offshore fishing while sailing. Below is a detailed explanation of the Autodrag function and its usage.

How to Use the Autodrag System

The Autodrag Slider (2) has two positions: engaged (forward) and disengaged (back). When the Autodrag Slider (2) is in the engaged position, the Autodrag Cog (3) on the main reel, gradually turns the Drag Knob (1) clockwise with each rotation. This action progressively increases the drag force up to approximately 15kg, allowing for smooth and more controlled increase of drag without manually operating the reel.

ATTENTION: If Autodrag is engaged and the furler system is used it will have the opposite effect. So it’s important to disengage Autodrag before starting to retrieve
04
STEP 1

Before mounting, attach the fairlead to the reel. It can be installed in either of two positions, depending on whether the reel is intended for left- or right-hand use.
Once the preferred position is selected, secure the fairlead using the 4 countersunk M6 bolts. Use an Allen Key to tighten the bolts to a torque of 4Nm. Then, gently wiggle the fairlead and re-tighten the bolts to 8Nm.
Verify that the fairlead is securely attached. If necessary, repeat the tightening process to ensure proper attachment.

STEP 2

Mount the reel in your preferred location on the transom, ensuring there is adequate space for adjusting the drag and engaging or disengaging the autocatch.
It is recommended that two people handle the mounting — best practice is to point the :HELM straight up and mount the M8 U-bolts, nylon washers, and hex nuts. Use a wrench with a 13mm size, tighten only until the reel is staying leveled, excessive force will bend the holder.
DO NOT OVERTIGHTEN

The horizontal leveling impacts if your reel mostly spools the line in the center or spreads it out. Depending if you sail in coastal or offshore a different adjustment may be better.